Search results

Are these unslab, repipes covered by insurance? $14K that an expensive water leak fix. If you don't see the leak $14k buys a lot of water!

True , but they still had to know where to install the electronic meter!! Don't you think?

The water provider knows where it is as they have t read it to know how much to bill you.Ask your meter reader!

I would add an ell or do some minor replumb to use them if at all possible. In the long run they can actually help prevent leaks by stopping some of the pipe shock and fatigue. just saying

I am confused ????? How is a ground fault tripping on a GAS water heater? Bradford white gas heater tripping GFI outlet

I, apparently, have Mansfield model 500 faucets that are pre Prier product purchasing them and can not find reapit parts. Anyone know of other places to get repair parts for it. It has a grey packing nut and it comes loose as the handle is turned on and does not shut off completely. I have...

Thank you were correct the handle was stripped

OK, well an update. Thanks for the reply. Yes, I had turned the water off. Sorry I should have mentioned that. (that was important) I had just never seen a situation where the stem keep turning and would not stop or shut the water off. So after I had a chance to take it apart and repair it...

I have a two handle kohler faucet that is a 1988 model ( don't know the number) The stem just keeps turning and will not turn off. Help!!

Thank you for your reply. I can not find any hot or cold spots on the floors but that are all carpet and mostly covered with furniture so they are not very accessible. Yes the meter is moving when all fixtures are at rest. About 0,6 to 0.7 GPM

I need some assistance. I have, apparently, a hot water leak under a slab! I will try to provide as much information as I have. Have a water softener (on first floor) and that is how I heard the leak, hissing and noticed that it was flowing at 0.6 to 0.7 GPM. After checking all toilets...

Thank you I will give it a try.

That's great news. How do I get a warranty replacement unit? I bought mine in about 1996 or 97 and do not have the original receipt. It is a single handle kitchen. Thanks

I usually double wax ring mine. Get one wax ring without the plastic flange and then put it on top of the wax ring they are very forgiving i have found and help with floors that are no level ( as in all slabs)

Thank you for your reply and suggestions, I have already performed those items, I have not found the hoses to be plugged or to gurgle with water. This is really crazy as I Know the water / condensate has to be coming from from the heat vent. Help!

Thank you for the reply. The condensate is piped directly into the drain. It actually has 2 drain tube that drain into a drain attached to the middle side of the furnace, the water drips into it then it drain into the floor drain.

I have a high efficiency downdraft gas furnace. When the unit runs a for a longer time due to the cold weather, water comes out of the bottom of the unit (A coil area). The entire area and next room carpet ar getting wet, The blowers on the unit are working and no error code coming for th unit...

Get a small diameter graphite wire fishing tool or even try the flat metal tape wire fishing too and shove it down the tube BAM there you go it will pop it open

Use dry wall mud either premixed or mix your own. Then push as much as you can under the toilet base as far back as you can. Then wipe up the outside and floor with water and a rag. let dry before you set on it and presto your level. This is what we did in the 1960's.

Thank you. I just hate to be a burden to anyone unless it is absolutely necessary and if I can find a fix without having to pull and replace the toilet I will be able to do it myself. So I will keep working at it. I am fortunate to have more than one toilet so I am still able to carry on my...