Question regarding fitting adapter

[jdb2]

Hello. I have a pump with a 1/2 inch NPT threaded outlet and I need to find a 1/2 inch NPT to
1/2 inch OD barb ( or just a smooth tube ) elbow / 90 degree adapter, but I have been unable to find anything.

I'm not sure if this is the right forum for this question, but, it's the closest forum to the topic I could find.

Any help would be appreciated,

Thanks

jdb2

 

[Geofd]

your in the right place....

you can find that fitting at any plumbing supply house...
not the big box stores

 

[TomFOhio]

There on-line also.

 

[jdb2]

Thanks very much for the replies

I have looked further but the closest I got to what I need was a 1/2 inch NPT male to 1/2 OD barb elbow / 90 degree adapter. If I had found a female adapter, then I'd be set, but I can't seem to find any.

Any tips to sites or companies to look for the adapter would be welcome.

Thanks,

jdb2

 

[Mr_David]

This won't work??
1-2-in-Brass-PEX-Barb-x-1-2-in-Female-Pipe-Thread-Adapter

 

[Mr_David]

googled 1/2" barbed brass fittings

https://www.amazon.com/Anderson-Metals-Compression-Fitting-Connector/dp/B0070TU3UQ

 

[jdb2]

googled 1/2" barbed brass fittings

https://www.amazon.com/Anderson-Metals-Compression-Fitting-Connector/dp/B0070TU3UQ

Thanks for the info I have done some extensive googling but I've yet to find what I need, which is a 1/2 inch NPT female to 1/2 OD barb or smooth tube 90 degree / elbow fitting.

I googled '1/2 female barbed elbow OR "90 degree" brass fitting' but it didn't turn up what I wanted. The closest thing I could find was this : https://www.plumbingsupply.com/images/brass-barbed-fitting-90-elbow-x-male.jpg . The problem is the above fitting has a male end and I need a female end and I've been unable to find anything like that.

Thanks,

jdb2

 

[gagecalman]

Will any of these work?

https://www.amazon.com/dp/B00N8YZYQ0/?tag=skimlinks_replacement-20

https://www.homedepot.com/p/Apollo-...e-Swivel-90-Degree-Elbow-APXFAE1212/301541107

https://www.amazon.com/dp/B0029T1TRI/?tag=skimlinks_replacement-20

https://www.amazon.com/dp/B007AHGKSW/?tag=skimlinks_replacement-20

 

[gagecalman]

I guess jdb2 found what was needed?

 

[jdb2]

I guess jdb2 found what was needed?

I apologize for the belated reply.

I did indeed find what I needed thanks to your help!

This, specifically : https://www.amazon.com/dp/B007AHGKSW/?tag=skimlinks_replacement-20

Hopefully it will work out OK.

Thanks,

jdb2