What size are these parts? Have measurement pictures.

[Farmskis]

I am curious if anyone is able to tell the size of these parts by this picture.

The check valve?
The metal elbow?
The black poly pipe?
The pipe from the check valve to the elbow?
The pipe going from the black poly to the elbow?

Salome parts are not being measured but I figure they are able to be determined by the parts connected. All the pictures give a big picture of the area.

 

[Twowaxhack]

I’d say thats 1” pipe.

 

[Farmskis]

I’d say thats 1” pipe.

1 inch poly? There is a few pictures and pieces I am trying to decipher.

 

[Twowaxhack]

Yeah, 1”

 

[Farmskis]

Yeah, 1”

Thank you! Are you able to tell if the elbow is a 1” by 1 1/4?

 

[Twowaxhack]

Thank you! Are you able to tell if the elbow is a 1” by 1 1/4?

That’s what it looks like. One pipe size larger.

 

[Twowaxhack]

The brass pipe is 1”. The black pipe is also 1”.

Both pics where your calipers are shown is 1” pipe.

 

[Twowaxhack]

This section may be 3/4” You’ll need to measure that short nipple where I circled.

 

[Farmskis]

This section may be 3/4” You’ll need to measure that short nipple where I circled.

That is what had me kind of confused. Because I was thinking all was 1” connected to the black 1” pipe, but the brass pipe measures like a 1” pipe but definitely looks larger. Seems odd that the 1 inch poly would have a 3/4 mpt, but that is what I was beginning to wonder.

 

[Twowaxhack]

That is what had me kind of confused. Because I was thinking all was 1” connected to the black 1” pipe, but the brass pipe measures like a 1” pipe but definitely looks larger. Seems odd that the 1 inch poly would have a 3/4 mpt, but that is what I was beginning to wonder.

Measure the pipe between the hose clamps and the 90. Post that outside dimension.

 

[Farmskis]

Measure the pipe between the hose clamps and the 90. Post that outside dimension.

I will have to do that when I get home later in the week.