sarg
Well-Known Member
I just found these instructions on a Ehow website. Could folks confirm if they are "backasswards".
I thought the adjustments were just the opposite on the smaller post
Step 3
Turn the nut counterclockwise with a nut driver to reduce the total range of pressure provided by the regulator.
Step 4
Locate the small nut and spring on the regulator. Turn the nut clockwise with a nut driver to reduce the difference between the "cut in" and "cut out" pressures.
Step 5
Turn the nut counterclockwise to increase the difference.
I thought the adjustments were just the opposite on the smaller post
Step 3
Turn the nut counterclockwise with a nut driver to reduce the total range of pressure provided by the regulator.
Step 4
Locate the small nut and spring on the regulator. Turn the nut clockwise with a nut driver to reduce the difference between the "cut in" and "cut out" pressures.
Step 5
Turn the nut counterclockwise to increase the difference.