Frustrated and need help!

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joesheets

New Member
Joined
Jan 24, 2015
Messages
3
Reaction score
0
Location
,
I am so frustrated! I am including a pic of a part that has failed in 3 of my faucets and I cant seem to find out where to get a replacement. It is some kind of valve that is in each handle. The problem is they lock up and stop working.
Any help would be appreciated!
Joe

2015-01-24 10.30.02.jpg

2015-01-24 10.30.30.jpg
 
I don't know wny it's locking up but I do know that after the third time, I would just replace the whole valve , sorry if I ain't much help
 
3 different valves have seized up on 3 different faucets. Once they seize, they don't work so I am looking for a replacement, I just don't know where to find them to replace them. That was the point of my post.
J
 
Good pictures of the cartridge, but let's also get a look at a few pics of the faucets in question that show the handles and spout.
I should add that the spline count might be needed. Count the number of little ridges on top of the cartridge stem by looking straight down onto it.
 
Last edited:
Here are the pics of the bar sink faucet and the bath faucet.
There are 16 splines.
J

2015-01-25 08.15.29.jpg

2015-01-25 08.15.08.jpg
 
Back
Top