jet pump

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. bpaigerussell120

    Spinning then not spinning when assembled

    Hi So I'm dealing with a shallow well jet pump. It froze and cracked the casing (not the motor side) with some cold weather we had a couple weeks ago... We JB Welded the crack put it back on but a pipe was busted inside the house so had to shut off... It also still had a small crack in the back...
  2. J

    Pressure switch rapidly turns on/off

    My family just purchased a house on a well that had water delivery issues. So I replaced the jet pump on my water tank to house water supply. The pressure switch rapidly turns on /off. How do I fix this issue? Also was the plumbing done right for this system? I copied the plumbing that was there...
  3. Albee9

    Deep-well jet pump that will not build pressure.

    Hi, I have a deep-well jet pump that will not build pressure. The symptoms are as follows: when the pump runs, it has about 40 PSI, and I can get water to my faucets. But when I turn off the pump using the switch, the pressure bleeds off quickly down to around 20 PSI and doesn't hold. What I...
  4. phoenixmac

    Jet pump won't reach pressure

    Hi- Installed a new Goulds J7 in 2020 and things have been running fine until last night (why is it always nights and weekends for this stuff?) Just before bedtime I noticed the pump was running nonstop and wouldn't build pressure above 38 PSI (pressure switch is set for 30|50). Turned off...
  5. L

    Can someone tell me if this thing is a well water jet pump? Or some type of old sump pump, thank you!

    Is this a water well pump? Can anyone tell me if it is safe to cut this pipe and fill the hole? Would any plumbers or HVAC people out there be able to tell me what this is? Its in my Cellar that used to be a drive under the house garage. It looks related to water, perhaps a well pump? Would it...
Back
Top