I'm installing a urinal in a residential bathroom. I bought a Kohler K 10675 flushometer on eBay. The flushometer came without a control stop. The Kohler control stop for this flushometer (1056893-CP) is quite pricey at $157. There are new control stops from Sloan, American Standard, etch all over eBay in the $5 to $20 range. I was hoping to find out if I could use another manufacture's control stop. Are 3/4" control stops universal? Does anyone make a cheaper option? Are there any compatible valves I could check eBay for? All my research has come up empty. Any help or advise would be appreciated. Thanks in advance.
Novice in need of flushometer advice
- Thread starter jayhamman
- Start date
Help Support Plumbing Forums:
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
to late now, but their is a cheaper route
instead of a flush valve, i have a spring, self closing valve on my urinal
when ready, just turn the valve and walk off. $35.00
never installed a kohler before. 100's of zurns, or sloans
i would think a sloan would fit it. all the ones i have dealt with are the same
instead of a flush valve, i have a spring, self closing valve on my urinal
when ready, just turn the valve and walk off. $35.00
never installed a kohler before. 100's of zurns, or sloans
i would think a sloan would fit it. all the ones i have dealt with are the same
Last edited:
