I have a somewhat unique problem and could use some advice. I have a unique cypress root console i want want to use in a powder room with a vessel sink on top. the console is 31" high and is mounted above a 3' high crawl space. The console is nearly solid wood. I want to drill a 3" hole vertically thru the console and put a 3' tailpipe on the drain. this means the trap would be approx 38-42" from drain to weir on the trap. You dont need to remind me that this is a bad idea because the falling water will likely break the trap seal making us vulnerable to the drain gases. I know that by reading this forum. My question is: are there any clever, alternative or possibly more complicated ways to put the trap that far from the trap safely. There simply no room behind, beside or in the console. The p trap would still be about 3' above the main drain that goes into the septic tank. I hate to discard the idea because the console with vessel sink would make a spectacular powder room decor.