John Puma
New Member
- Joined
- Jan 29, 2024
- Messages
- 3
- Reaction score
- 0
I recently installed a Moen Attract dual shower head and i've noticed that there's some strange behavior around temperature depending on the mode i'm using.
Some background:
Some background:
- I'm in a pre-war building with a "classic" two knob layout. the knobs have not been modified.
- i have removed the flow restrictor
- When i'm using the Moen in dual mode (standard with hand), the temperature is very good
- when i use it in standard mode, the pressure obviously goes up and the temperature remains where it was set.
- if i switch it to handheld only, the water gets.. quite strangely... cold for a few moments, then balances out to something "not quite hot"
- if i nearly turn the cold knob off, the handheld can get to normal, but if i flip it back to standard or dual mode, it's (obviously) searing due to the adjustment.