I need a couple of these valves if they’re even made.
Like this but the inlet needs to be FIP, sweat or compression. In that order.,
Like this but the inlet needs to be FIP, sweat or compression. In that order.,
1/2” compression x 1/2” Mip Chrome angle stop valve.
- Thread starter Twowaxhack
- Start date
Help Support Plumbing Forums:
gagecalman
Well-Known Member
They do make them but backordered.
https://www.supplyhouse.com/Dahl-61...-Stop-Isolation-Valve-Lead-Free-Chrome-Plated
Another option but probably not as nice:
https://www.supplyhouse.com/Dahl-61...-FIP-Angle-Stop-Valve-Lead-Free-Chrome-Platedhttps://www.supplyhouse.com/Bluefin-CRN050-1-2-x-Close-Chrome-Brass-Nipple-Lead-Free
https://www.supplyhouse.com/Dahl-61...-Stop-Isolation-Valve-Lead-Free-Chrome-Plated
Another option but probably not as nice:
https://www.supplyhouse.com/Dahl-61...-FIP-Angle-Stop-Valve-Lead-Free-Chrome-Platedhttps://www.supplyhouse.com/Bluefin-CRN050-1-2-x-Close-Chrome-Brass-Nipple-Lead-Free
sarg
Well-Known Member
I’m installing this circ pump under a lavatory and the guy wants hoses that’ll connect to 1/2” mip threads. These will go from the new stop valves to the bottom of the tees in this pic.
From the top of the tee it goes to the faucet. This will get reduced to 3/8 but I need the run from the valve to the pump to be larger hoses.
No sharkbites.....
I found those late lastnight that’s what I need...... now I need to find them.
gagecalman
Well-Known Member
I looked but had no luck.
Contact Dahl. Maybe they would know of a supplier that has stock.
Good luck.
This job is complete. I didn’t replace the valves and the unit is operating fine.
