Search results

There are two styles of moen valves. The older with the smaller cartridge that they use in kitchen faucets and lays, and the larger"magnum" style that they still use today. I suggest you take a picture with the handle off and post it. Smaller style you might fine some trim online and the bigger...

I have had fill valve make loud noises and when they shut of slamming the diaphragm and making the noise. Don't know if this is your problem but open the lid if the toilet and test it to see if you can hear it louder in your tank

I'd put that in my shoes for mud... That would be awesome

Website it incorrect .. But I pulled the manufacturers of the pipes in question of a google search "Have you identified ABS pipe in your home manufactured by the defendant manufacturers (Centaur, Phoenix, Gable, Polaris, and Apache)? If yes, include the code information, number of leak(s)...

The website is like badabs.com or something like that. Used to have the info in my truck. What happened is back in the eighties they were melting old scrap pipe back into the pot and weakens the construction of the pipe. They were putting it in way up until the late 80s.

This is a stress crack possibly caused because this is defective abs piping... Look online to see what brands and if t qualifies as defective... Seen lots in my day and look exactly like what happens to it. It will crack again until you replace it. My recommendation is to research your piping...

That is called a in line recirculating system. You need to put a pump on the water heater to make that work. That said, that is only for delivery of hot water taking too long. Not for cold water. Yes I'd does plumb into the cold But not enough to keep It from freezing when the pump is on. This...

Also 6 or 8 inches for a standpipe is not enough.. Must have min 36 inches for proper flow... That said, sometimes it's just old piping. Or you could wrap duct tape around the hose the size of a tennis ball and push it down the standpipe. By all means NOT RECOMMEND it , but works

That faucet might be discontinued, but that cartridge is not. Many vendors will have that style . Turn off the water and go down to your local plumbing supply( Fergusons might be your best choice) . I just replaced a cartridge for the exact faucet last week, which is the only reason I know they...

I do plumbing in several north shore condos and one south shore cabin in scoits tract. Any gas tankless require a stainless flue pipe that you will probably not be able to get under the cabinet. Next choice other than relocation is to install another 28 gal and hope for the best

Sounds to me like expansion or contraction in the pipes. Could also be an angle stop not opened fully.. Check all hour angle stops and if they are fine it's expansion contraction stated above. Really not much you can do for it other than open all the walls and restrap an bore bigger holes. That...

Sounds like a manufacture defect in the toilet... Take it back and get a new one . That's what i would do

Get a badger model.. They are industry standard you can buy at the depot. 1/2 and 1/3 are on but I like 3/ 4 the best

That is part of the brass body of the faucet and you must replace the whole faucet.

This and this alone is why I do not buy from Home Depot or lowes. Because you must pull the water heater and take it back. With ao smith, rheem, Bradford white & state , there reps come out to the house and fix it... If they cannot , they will replace the heater. I will pay the 20 or 30 bucks...

Glad we could be helpful, or maybe not so helpful... Lol

Those are your only options. Lift station is probably your least costly option.

As far as pex is concerned, any product is the same. I've used zurn and viega myself. I would stay away from shark bite brand myself. Just never used the stuff. I do like the sharkbite fittings only for spots with no access.

I can't count how many times I went to a house and it was those stupid floodsafe supplies. I hate those things!

Fl plumbing, Everyone's pricing should be different. Should be at the costs of your operating expenses and profit . Looking into small business organizations that will help you with all that.