Dollar_Bill
Member
I have talked with a plumber who suggested making a jetter from a pressure washer by adding a jetter line. This would seem to be a relatively simple project.
I do mainly new work and only occasionally need a jetter, I can buy a Sewer Jetter Kit with either a 1/4" or 3/8" ID Schieffer sewer hose. 4400 psi. Hoses come in 100' or 200' lengths. 1/4" would give me 2.5 GPM. 3/8" 3.5 GPM.
I can get a pressure washer hose reel to hold the hose.
I have a Ridgid 3200psi pressure washer and a smaller electric one.
Most drain lines are 2" - 4".
Any tips?
Ideas?
Concerns I could address up front?
Would you suggest a 1/4" or 3/8" ID?
Bill
I do mainly new work and only occasionally need a jetter, I can buy a Sewer Jetter Kit with either a 1/4" or 3/8" ID Schieffer sewer hose. 4400 psi. Hoses come in 100' or 200' lengths. 1/4" would give me 2.5 GPM. 3/8" 3.5 GPM.
I can get a pressure washer hose reel to hold the hose.
I have a Ridgid 3200psi pressure washer and a smaller electric one.
Most drain lines are 2" - 4".
Any tips?
Ideas?
Concerns I could address up front?
Would you suggest a 1/4" or 3/8" ID?
Bill