Help this girl finish a dishwasher install :)

I apologize for not realizing you were dealing with copper tubing all the way up. Frodo, once again, is giving you solid information.

Ok Progress!!

I *think* I did it

I was able to find the following fitting:

https://www.homedepot.ca/en/home/p....lated-brass-lead-free.1000789590.html?redir=s

Good news is that everything is hooked up, and NO leaks when i open the valve (there a LOT of pressure lol...i could only open the valve partially before the water would splash out of the bucket....guess the dishwasher will use a lot of water!)

Now...here's another stupid question. So it doesn't leak.. But is there any way to help make sure that i did it properly and that it won't come undone in a month, and flood the condo (and my neighbors)

Here are some pictures - Not the prettiest job but hopefully it works Looks ok? I used teflon tape on the flex hose hookup..not sure if that right ok but that's the white tape u see.

Thanks again for all your help

pull on it, try to rip it off of their

take it apart, the olive should be compressed onto the pipe, you should not be able to slide it off