Hey, THANX Zanne for this thread!
Very informative...
My pleasure. I hope it can help people who don't know what code is used in their area so people can refer to this as reference.
I'll try to keep it updated.
Hey, THANX Zanne for this thread!
Very informative...
Louisiana House Bill 1048 was signed by the Governor on June 23rd, 2014 and enacted as Act Number 836 of 2014. With an effective date of January 1st, 2016, this Act repeals the authority of the State Health Officer, acting through the Office of Public Health (OPH) of the Department of Health (DHH), to prepare and promulgate plumbing rules and regulations.
In accordance with the Act, the Louisiana State Plumbing Code [Part XIV (Plumbing) of Title 51 (State Sanitary Code) of the Louisiana Administrative Code (LAC)] will be null, void, and unenforceable on and after January 1, 2016. As required, the Louisiana State Uniform Construction Code Council (LSUCCC) will promulgate State plumbing regulations through the evaluation, adoption, and amendment of the following codes as part of the State Uniform Construction Code:
The 2012 International Building Code, Chapter 29-Plumbing Systems;
The 2012 International Residential Code, Part VII-Plumbing; and,
The 2012 International Plumbing Code.
Applicable plumbing provisions of these codes, along with state amendments thereto adopted by the LSUCCC, will become effective January 1, 2016.
The International Codes can be assessed at: http://publicecodes.cyberregs.com/icod/index.htm
Louisiana amendments were published as an Emergency Rule in the December 2015 Issue of the Louisiana Register. These amendments can be accessed at: http://www.doa.la.gov/osr/EMR/1512EMR082.pdf
Beginning on January 1st, 2016, all plumbing systems will be required to be designed in accordance with the provisions of these codes, as amended by the LSUCCC. This includes new construction, reconstruction, and the extensive alterations or repair of buildings and other structures. In accordance with the Act, LDH will no longer have enforcement authority over the new plumbing provisions that will become part of the State Uniform Construction Code. Enforcement of such will be handled in accordance with LA R.S. 40:1730.21 which requires all local municipalities and parishes in the State to enforce the State Uniform Construction Code. This includes plan review, conducting of inspections, and the issuance, denial, or revocation of permits.
In addition, the new law amends the Louisiana Building Code (which governs the design of state-owned buildings) by removing compliance with Part XIV (Plumbing) of the State Sanitary Code and replaces it with the above referenced codes, as amended by the LSUCCC. Beginning on January 1st, 2016, the Office of Facility Planning and Control of the Division of Administration will be responsible for ensuring that state-owned buildings comply with these newly adopted plumbing regulations.
I was curious about which states follow which plumbing code and found this on the forums at terrylove.com and filled in and changed based on http://www.tests.com/State-Plumbing-Codes-License
http://gisceu.net/PDF/U103.pdf
Changes made to Louisiana plumbing code in 2013
Louisiana does not allow AAVs and the allowable distance from trap to vent in a 2" drain was reduced from 8' to 6'.
Any corrections or additions?
Sorry you lost me on "a bend in a straight line..."If you imagine a bend in that straight line, but continuing downward at the same slope, you have the same siphoning characteristics.
Oh ...I gotcha. Didn't think about it that way. Yeah it wouldn't matter, the same would apply if it was curve or straight. It's the total distance and resulting fall that matters. 8 foot distance at 1/4"/ft would be 8 x 1/4" or 2", the total diameter of the pipe, which effectively closes off the venting capabilities. It's 6 ft, in many cases, to make it conservative.Like a drain going around a corner in the framing, but continuing downward at the same slope. If the developed length of that run and the drop are the same as those in a straight line, I don't see why the siphoning characteristics should be any different.
? i am a Plumber in New Jersey and does anybody knows where can i get the app for the IPC . i have been trying to get it on line.....
in North Carolina, 2018 IPC, with county amendments, and the usual inspector bullshit interpretation based on the mood they are in.I was curious about which states follow which plumbing code and found this on the forums at terrylove.com and filled in and changed based on State Plumbing Codes, Study Plumbing Codes for Plumbing License Exam
Alabama IPC adopted by Local Governments
Alaska UPC adopted at State level but IPC in use locally
Arizona UPC adopted at State level but IPC in use locally
Arkansas uses IPC
California is based on UPC
Colorado uses IPC
Connecticut IPC effective Statewide
D.C. IPC effective in city
Delaware IPC effective Statewide
Florida IPC effective Statewide
Georgia IPC effective Statewide http://www.plumbingpros.com/pdf/dwvents.pdf
Guam uses IPC
Hawaii uses UPC
Idaho uses IPC
Illinois Develops their own code but IPC adopted by Local Governments
Indiana uses the Indiana Plumbing Code (as of 2012 it used 2006 IPC second printing)
Iowa IPC adopted by Local Governments and statewide
Kansas uses IPC
Kentucky State Plumbing Code based on IPC precursor
Louisiana State Plumbing Code based on IPC precursor
Maine IPC adopted by Local Governments
Maryland uses IPC
Massachusetts uses UPC, 248 CMR 10.00.
Michigan IPC effective Statewide
Minnesota uses Minnesota Plumbing Code
Mississippi IPC adopted by Local Governments
Missouri uses UPC
Montana uses UPC
Nebraska uses IPC
Nevada uses IPC
New Hampshire IPC effective Statewide
New Jersey uses NSPC
New Mexico uses the New Mexico Plumbing Code based on UPC
New York IPC effective Statewide
North Carolina IPC effective Statewide
North Dakota uses IPC
Ohio IPC effective Statewide
Oklahoma IPC effective Statewide
Oregon uses the Oregon Specialty Plumbing Code based on UPC
Pennsylvania adopted IPC
Puerto Rico IPC effective Statewide
Rhode Island IPC effective Statewide
South Carolina IPC effective Statewide
South Dakota uses UPC
Tennessee IPC effective Statewide
Texas IPC at State but Austin, Houston, San Antonio use UPC
The Texas State Board of Plumbing Examiners recognizes the 2006 editions of the UPC, IPC, & IFGC which means each city or town in the state can either adopt the UPC or IPC/IFGC regardless of edition.
Utah IPC effective Statewide
Vermont Use 1990 BOCA (BOCA now under IPC)
Virginia IPC effective Statewide
Washington uses UPC
West Virginia IPC effective Statewide
Wisconsin Plumbing Code Link
Wyoming Both IPC & UPC used by Local Governments
http://gisceu.net/PDF/U103.pdf
Changes made to Louisiana plumbing code in 2013
Louisiana does not allow AAVs and the allowable distance from trap to vent in a 2" drain was reduced from 8' to 6'.
Any corrections or additions?
Enter your email address to join: