I have an 8 inch clean out for a commercial property I own. It's extremely difficult to find in stores and people back over it at the street level regularly. Any body know why my business is equipped with an 8 instead of a six?
I have an 8 inch clean out for a commercial property I own. It's extremely difficult to find in stores and people back over it at the street level regularly. Any body know why my business is equipped with an 8 instead of a six?
I was just wondering if there was a method to the madness. Eight inches are harder to find and cost more so I was wondering if there is a practical application for this or if was just the plumbers choice me.
You have an 8" Clean out because you have an 8" sewer line.
I don't know how big your building is, or what water and sewer services you are utilizing, but I can tell you that you should be very grateful to have a large sewer line. All too often we run into issues where the sewer is too small for the proposed fixture units, and it becomes a big pain in the ass to fix and a big unwelcome expense for the building owner to repair.
Don't worry... Be happy. Seek out the parts for your 8" claen out with a smile on your face
The codes specify that the line has to have a "full size cleanout" up to 4" and a 4" cleanout MINIMUM for larger pipes. Therefore we usually only install 4" ones and it is not a question of cost, it is one of practicality. Most lines can be cleaned through a 4" cleanout.
The codes specify that the line has to have a "full size cleanout" up to 4" and a 4" cleanout MINIMUM for larger pipes. Therefore we usually only install 4" ones and it is not a question of cost, it is one of practicality. Most lines can be cleaned through a 4" cleanout.
Thanks guys I was just wondering! It seemed needless because the cost is exponentially higher than it's smaller contemporaries. So a larger line means more can pass through thereby decreasing my chances of issues? If I read it correctly?
Enter your email address to join: