FROM the guys a TACO PUMPS
Benjamin Needham,
Taco has responded to the request you submitted on Taco-HVAC.com.
From: Benjamin Needham
Message: Ok so, Assuming the pump was sized based off of a design flow of approximately 1GPM... The head loss in your system would be ~ 0.5Ft If I plot out your
system curve overlaid with the 007 pump curve, the actual expected flow would be ~ 4GPM 40 feet of 3/4 inch type L copper will hold ~ 1.016 Gallons 1.016Gal/(4 Gal/Min) ~ apprximitly 15 Seconds Provided the assumptions are correct.
To respond, please click here.
Do not reply to this email
their you have it
approx 15 seconds for da hots wadder to be at the faucet