Dempseyjosh
New Member
Hello, I'm adding a bathroom to my basement, and I've been poking around looking at threads but I think I need help on my layout directly.
So before knowing how deep the main line we were tying into was, I had plans on how I was getting this all done. But now that I see the line isn't very deep, I've got to rethink some stuff. The stack there is dedicated to the bathroom on the second floor. I was going tie the vents for each item in the basement together and run up through the wall and tie into the vent in the attic. We cut up the floor and found the line is shallower than we thought it would be. The bottom of the pipe sits down about 8"
If I was able to raise the floor a some, I don't think we'd have much of an issue, but where the toilet is, the finished height will be 6'10 and the rest of the bathroom 7'6, so i really want to avoid that.
Trying to draw this was giving me a headache, but here's what i've got.
1. is it ok if that p trap for the tub dips below the main 4" drain
2. are those acceptable vents for the toilet toilet and tub
So before knowing how deep the main line we were tying into was, I had plans on how I was getting this all done. But now that I see the line isn't very deep, I've got to rethink some stuff. The stack there is dedicated to the bathroom on the second floor. I was going tie the vents for each item in the basement together and run up through the wall and tie into the vent in the attic. We cut up the floor and found the line is shallower than we thought it would be. The bottom of the pipe sits down about 8"
If I was able to raise the floor a some, I don't think we'd have much of an issue, but where the toilet is, the finished height will be 6'10 and the rest of the bathroom 7'6, so i really want to avoid that.
Trying to draw this was giving me a headache, but here's what i've got.
1. is it ok if that p trap for the tub dips below the main 4" drain
2. are those acceptable vents for the toilet toilet and tub