Search results

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Help with project using PVC??

    Thanks I'm going to look into that
  2. M

    Help with project using PVC??

    Hey guys, I had to replace a few valves, and thought that this would be a good time to add a water line into the garage, so that I could use a pressure washer for my washout booth. I have attached what I have done so far. Once I really started to think about what I needed to do, I started to...
  3. M

    Tub and Toilet clogged at the same time?

    Any ideas on the cause? I've never seen both clogged at the same time.
  4. M

    How to join a galvanized pipe to unthreaded T fitting?

    I'm sorry, meaning if I did go with pvc, how would I connect to existing galvanized
  5. M

    How to join a galvanized pipe to unthreaded T fitting?

    How would it connect the existing galvanized after cutting? Compression joints?
  6. M

    How to join a galvanized pipe to unthreaded T fitting?

    Oh wow. Thank you.. I didn't know I could turn anything on the T joint. I'm off to lowes now
  7. M

    How to join a galvanized pipe to unthreaded T fitting?

    Okay, I'm changing out my drain, and the pipe came loose underneath. Initially I thought I broke it, and was extremely frustrated because I had to go underneath the home (all the way to the back!) at 8pm. Well, I see the pipe is not broken, it just came loose. I was surprised to see that it...
  8. M

    HELP! New Sink set up?

    Okay, I had new countertops along with a new sink in stalled. i assumed that I would just be able to mimic the old set up prior to the install, but I was wrong. I had to purchase new flanges because they took my old ones when they disposed of my old sink. I have attached photo of before and...
  9. M

    Spigot in front of pressure regulator??

    FYI, pressure is 120 psi coming from the street without a pressure regulator.
  10. M

    Spigot in front of pressure regulator??

    I've included a photo
  11. M

    Spigot in front of pressure regulator??

    I finally finished my repipe. It took 3 1/2 days, and I moved the water heater outside. Everything turned out fine, except for the water pressure when the backyard spigot is turned on. Prior to the repipe I couldn't shower and water grass at the same time because the spigot was tied into the...
  12. M

    Water Hammer Arresters

    I just looked at the ox box from Sioux chief. I am seriously going to try and find these things before Saturday
  13. M

    Water Hammer Arresters

    I also read those air chamber weren't good because I would constantly have to drain after the pipe fills up with water. Is that accurate?
  14. M

    Water Hammer Arresters

    So, in my case I would only need one on the hot/cold washer, cold for dishwasher, and one for the spigot in the backyard used for my sprinklers. Are they supposed to be same size of pipe or 1 size bigger. I read they should be bigger. Meaning 3/4 arrester on 1/2 line?
  15. M

    Water Hammer Arresters

    I will be repiping the house from galvanized to copper. Do people install these arresters if they experience water hammer, or a head of time as a preventative measure? If so, where should I put them as a preventative measure? Also, I've read that they should be large than the supply line. Now...
  16. M

    Installing flexible copper pipe to water heater

    But do I have to drain?
  17. M

    Installing flexible copper pipe to water heater

    Any tips installation wise? I know, I'll be cutting off water. Do, I have to shut off gas? I wouldn't think so Do I have to drain?
  18. M

    Installing flexible copper pipe to water heater

    I will be replacing the galvanized pipe from my water heater with the flex copper pipe. Any install advice?
Back
Top