Search results

Possible faulty cartridge, or trash in the lines. You might try removing the cartridge as you did before after shutting off the water. With the cartridge removed, close your shower curtain or door. Turn the water back on to the valve with the cartridge removed for 1-2 seconds to flush out an...

If there is no sign of water or mold then the noise your probably hearing is expansion and contraction of the water or sewer lines that are inside the wall. When the plumbing installers drilled through the wood and installed plumbing, they might have somehow put a pipe in a bind. When that pipe...

I have a 82 unit hotel that is currently running 2- A.O. Smith Cyclone xi heaters ran in series and balanced with a recirc pump located in their boiler room. One of the heat exchangers died on the one of the cyclone heaters and it will not heat anymore. The owner bumped up the temperature on the...

It may just be me but it looks like that's a 1/2 copper street 90 sweated into the end of that hosebib. If it is a street fitting I would question if it's fully inserted into the hub of the hosebib. It looks like its not pushed in all the way and cocked at an angle.

Your handle won't stay up because the internal copper part of the spindle inside the cartridge is to loose. Turn off the supply. Remove the handle, and black or grey bonnets surrounding the cartridge. Remove the clip. Pull out cartridge. Push copper spindle out of the clear cartridge housing...