Search results

Just for you to know. Called the plumber, there were 2 issues. The pipeline inside the wall was stuck with dirt. I partially improved the water flow with the snake, then he cleaned up the pipes with a professional snake tool connected to a compressor. Secondly, he replaced the pipes under the...

Thank you very much for your suggestions In the meanwhile I called the plumber, he replaced all the pipes inside the cisterns of both toilets. He also replaced the water supply valves inside the cisterns Will remember your suggestions for the future

In the meanwhile I checked what happened there. The good news is my repair is actually working once I plug off the drain pipe from the wall. The bad news is that the problem is now either the strainers or the drain pipe in the wall itself. The last part of the pipe is fine it doesn’t contain or...

Thank you will check it out and give you a feedback

Milan, Italy You are probably wondering about how this plumbing was made because the materials might look unfamiliar for those who live in the US This faucet anyway was installed in a quite crappy way for the standard of Italian houses Here normally you should see metal pipes and the connections...

The water is always running in 2 different toilets. In one of the 2 toilets I replaced I think 1 year ago the flapper and other parts. It should be new or almost new. Anyway perhaps I am missing something, maybe it was damaged or not properly installed. The problem during winter affects also the...

In the pictures you can see the pipes under the sink.When I removed the old faucet and installed the new one it worked quite fine, except for the right pipe connected to the right sink (the sink is divided in two). Water was dripping from the pipe below the right sink. I as trying to fix this...

https://ibb.co/mBZwDo https://ibb.co/jwmnKT https://ibb.co/ctvQ68 https://ibb.co/gcXGDo https://ibb.co/nhj7KT

Solved... And now there is another much worse problem hahaha The duct tape was incredibly tight, like cement. I went to the local hardware store they suggested me to use a Stillson pipe wrench https://www.leroymerlin.it/catalogo/giratubi-svedese-430-mm-36328201-p Problem solved immediately in...

Thanks and that’s exactly what I did. Since the connectors are not that big I had to use smaller wrenches, 2 of them used as you said. But it didn’t work. I tried with different tools, probably I need a bigger monkey wrench or even better Stillson wrench

i am getting crazy... I have a very simple task. I need to replace a kitchen sink faucet. The faucet has two hoses one for warm the other one for cold water. I already removed the connector on cold water hose, no problem. I can’t remove the other one. It was used a thin white duct tape made of...

Hello, I am from Milan, Italy. I happen to have a problem with the pressure of the water in my place and I will ask for advice in the proper section. I enjoy reading technical forums like this one, there is always very much to learn from people who have experience and skills. For sure I will...