Search results

yes. plant flowers along the path. you won't have to water them!

useless, you could have dug up the pipe in the time you took to post the question

that's all stuff i'm surprised you didn't find on youtube with videos ! is this post a troll post?

ok sprinkler. obviously you need to look at that automatic valve or replace it. (insure it's getting power first if it's difficult to remove to eliminate that possibility). the whining is likely failure to fully close but attempt of close. it should be totally unrelated to the bathroom as it...

i don't agree. stop blaming the pipe. (it'd only leak if some nauxous chemical put a hole in pvc - i doubt it. pvc "glue" actually creates pvc so for it to leak ...) it's not a pressurized PVC i assume, it's a drain if i see the size and guess usage right if you have water under your...

#1 if it works don't fix it. ad your new valve elsewhere. you can just "re-pack" the valve but as you said you need to shut off street water to do it. your responsible if you touch that valve (street valve) and it leaks !!! don't do it. ad a valve elsewhere. #2 the ground tie to the...

Ok. I figured out the hard way: when doing 15-20 connections or more: you have to plumb the pipe (incl. copper clamps), then flux, then reinstall and solder. This advice i found on youtube about plumbing a new home on a jobsite (many connections at once all in final placement / plumbed before...

I see two problems: The pro plumber did not support the fixtures he "floated them" (piping below valve supported by solder joints, value unsupported too): so i had no idea i would have to do better than that, or what problem i'd be adding by making that rotated angle (difficulty in supporting...

yea i think that's easiest. i see there are copper straps at HD, i could two these || to floor at lowest point, leaving only weight on the soldered NPT ends (which i guess is ok? codes anyone?) anyone have input on how much hang weight is allow "to hang" and what is "code" ? is a hose hung...

i just added the ball valves and shiny part at the bottombut did *not* change the pipe support. (i'm thinking of adding more support?) the support is the same as some "proffesional" plumber had installed (a single copper nail in 2x4). worrysome to me is ballvalve+pipe on right: notice how it...