I dont know an inspector around that would pass that unless he just does not care. Ultimately it falls back on plumber who installed it anyway...
Then people wonder why plumbers charge what we charge now the price has doubled cause he tried to fix himself lol
Wtf an inspector passed that they need to come and do it right to fix it that is total BS work
Is tank cracked around flush valve
There could be a salt bridge in system
Turn cold water off open drain bib loosen flex line on top of heater to let air into tank and it will drain
If I was yaw I would tell them to kick rocks. We are here for advice yes but when it comes to gas and someone doing it them selves I would stay...
Some disposals dont have allen key in bottowm
I charge 150 for hour and 80 dollars parts for a total of 230. Keep I'm mind all the expenses to get your truck to the customer
There is nothing in code book that says you can't use lead and oakum
Use silicone instead of putty. Putty dries and cracks
Buy a inside cutter and cut it down ridgid makes one that is easy to use
Yes it has to be vented
I'm not saying go nuts on it but it might work or the flex lines were tightened to tight and ripped the washers that could be why its leaking
Try using teflon tape and pipe dope not just dope
Slope on 3inch has to be 1/4 inch per foot 1/8 inch for 4 inch and bigger is code
Take and cut square head off with sawzall then use sawzall to cut cap into pie shape and peel it out
Next time use pvc does not belly as bad
Separate names with a comma.