Double Sink Rough In Question

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dave T

New Member
Joined
Nov 20, 2019
Messages
2
Reaction score
0
Location
St Louis
Hi,

I'm working on a bathroom and will be adding a double sink vanity that will share the other side of a wall with a washing machine.

Looking for someone to tell me if they any know areo any code issues with my layout

It's a rough sketch so feel free to ask any questions. My main concern are making sure there aren't any issues with the 3 sanitary tees on the waste stack that will for both sink drains and washing machine drain. They'll start at the floor and finish around 18" above the floor so that the sink DWV is the right height and the washer trap arm isn't above 18".

Thanks
Plumbing 3.jpg
 
nope.

nope

nope

lol

that is not going to work, a washer is a suds producing fixture and those sinks will get suds backing up into the sink

you need to tie into that 2'' line after the washer and by code you have to tie in minimum 8' from the connection
. i think you can get by with 5' ..

bribe.png
 
With all due respect, I don't think that applies here.
8 feet from the bottom of a stack that has a suds producing fixture dumping in it.
Also, doesn't typically apply to single family residence.
Here's the UPC. Couldn't find in IPC.
2018 Uniform Plumbing Code.jpg
 
Back
Top