Having a stand alone condo built, on a concrete slab. The plumber heated this pipe (see picture) to bend and twist to make it fit because it was coming out of the concrete in the wrong position. This is in the master bath that has 2 sinks and this is the drain for one of the sinks. The contractor says it has to stay that way because its toward the out side wall and they would have to cut into the concrtete floor and foundation to fix it. He said a pressure test was done and if I want he will do it again. As you can see in the picture its very close to the concrete slab and the plumber heated it with a torch to position it. The county inspector has ok'ed it.
1. Should I accept it ?
2. Put bore scope in pipe and see what it looks like inside?
3. Come out of this sinks drain pipe over to the other sinks drain pipe as a back up in case the drain cloges with hair and etc. in the future?
4. What is your thoughts?
Thanks
Ron
1. Should I accept it ?
2. Put bore scope in pipe and see what it looks like inside?
3. Come out of this sinks drain pipe over to the other sinks drain pipe as a back up in case the drain cloges with hair and etc. in the future?
4. What is your thoughts?
Thanks
Ron