Help Identifying Kitchen Sink Faucet Manufacturer

Can anyone identify the manufacturer of this kitchen sink faucet or offer any advice on how to remove the handle assembly without damaging the finish. There isn’t any branding or identification numbers on the exterior of the faucet, but the sink is from MILA International. However, it doesn’t appear they make faucets.

Thanks!!

looks like an amazon special. See the red line. That chrome cap might pop off. Or the skinny rod may unscrew to expose an Allen head set screw.

HANSGROHE AXOR MAYBE

Jamesplumbing06 said:

looks like an amazon special. See the red line. That chrome cap might pop off. Or the skinny rod may unscrew to expose an Allen head set screw.

Click to expand...

Thanks, that worked, but unfortunately the handle was stuck on there and the plastic shaft snapped while trying to pull it off.

The good news is I found what appears to be the cause of the leak, the brass lock nut holding in this blue valve was loose. Bad news is I can't seem to find a replacement for this valve with the broken shaft.

Anyone know where I can buy a new one of these? Stamping reads 051009.

That’s an eljer. Turn it so we can see oring pattern

After some Googling, it appears to be a Moen 4000 Faucet Cartridge. Looks just like this one on Amazon.

https://www.amazon.com/dp/B00S04QK52/?tag=skimlinks_replacement-20

Looks like that answer is — Moen. Here is a better photo on Home Depot.

Thanks for all of the help!

https://www.homedepot.com/p/MOEN-Single-Handle-Replacement-Cartridge-4000R/300115782

Ok cool. Haven’t seen that moen cartridge yet. Must be a good one.