I have installed 6 or 7 in the past 10 years and havent gotten a call back on any of them
oh yea no gluing abs and pvc together
us plumbers we use a 2 1/8 bit for 1 1/2 pipe, and a 2 9/16 bit for 2 " pipe. The washer box is 2" pipe without a doubt. If you have a 1 1/2...
The Tub faucet either has 1/2" or 3/4 connections on the back. The flow rates are maximum but are partially determined by what you are hooking it...
This all looks like 1 1/2 to me.
It still wouldnt meet code but Im sure that would work. If and when you sell your house a home inspector is going to "make" you fix it.
so are you planning on sticking the discharge hose into the drain in the floor? When the machine discharges water is going to come pouring out of...
The valves have wog rating on them. 600 would be good. its pretty much standard for a decent valve. think about an old 60k furnace burner or...
you might think about putting a right angle ball valve on the tank. From one beekeeper to another. Tough to drain hot wax with just a plug.
nj hasnt even passed the 2015 code yet In house cpvc is allowed
42" min. depth
nj national standard plumbing code We can use copper but the cost is unappealing
we use 80-100 psi poly for sprinklers, 120-140 psi for wells and 160-200 psi poly for water. If you are trying to fix a 500;
foot waterline the...
what jeff said, look for a birds nest in your flue pipe
counter clockwise rotation while holding the handle as per breplum
Separate names with a comma.