Geofd's Recent Activity

Help Support Plumbing Forums by donating:

  1. Geofd replied to the thread Replace old water supply valves with ??.

    those are BRASS CRAFT valves should say right on the handle....you can buy replacement washers one (small)goes on the stem one (large...

    Jun 17, 2019 at 7:03 PM
  2. Geofd replied to the thread Unknown shower cartridge.

    what does the trim look like?????

    Jun 17, 2019 at 6:51 PM
  3. Geofd replied to the thread Trying to clean stopped kitchen drain with 50 ft replacement cable.

    the ty is the fitting in the wall that looks basically like at tee allows water to drain below and becomes a vent to allow air in so the...

    Jun 17, 2019 at 2:22 PM
  4. Geofd replied to the thread Quarter Turn Valves.

    use the old style football handle brass craft valves there are 2 washers that can be changed out the small one on the stem and the...

    Jun 16, 2019 at 4:10 PM
  5. Geofd replied to the thread Putting bellends on 2,3,4 inch pvc pipes..

    I don't really know what your trying to do the pvc will clamp onto one end and you can pack and pour the other end or use a resilient...

    Jun 16, 2019 at 4:02 PM
  6. Geofd replied to the thread AC Condensate Line Cleaning.

    if what Frodo and diehard is NOT the problem many pan clog were I work its usually 3/4 inch.....there are 2 things you can try home...

    Jun 16, 2019 at 1:05 PM
  7. Geofd replied to the thread Broken Tub Drain.

    there is also a tool out there.....don't know the name but it looks like an easy out goes right on were those cross braces would be if...

    Jun 16, 2019 at 12:52 PM
  8. Geofd replied to the thread Putting bellends on 2,3,4 inch pvc pipes..

    i believe that's the hub you could cut the end you need off of a service weight(sv) its marked on the pipe use a transition coupling...

    Jun 16, 2019 at 12:46 PM
  9. Geofd replied to the thread Putting bellends on 2,3,4 inch pvc pipes..

    Jun 16, 2019 at 12:40 PM
  10. Geofd replied to the thread Trying to clean stopped kitchen drain with 50 ft replacement cable.

    are you sure the snake is not going up the vent????put a small bend at the end of the cable and just bump the trigger until it drops...

    Jun 16, 2019 at 12:38 PM
  11. Geofd replied to the thread Trying to clean stopped kitchen drain with 50 ft replacement cable.

    you can also buy a 50 by 1/4"cable from general or rigid but the drum on your snake must be able to accept that length

    Jun 16, 2019 at 12:35 PM
  12. Geofd replied to the thread Trying to clean stopped kitchen drain with 50 ft replacement cable.

    I have snaked back to back lav drains from the vent on the roof....but that way you will lose about 10 ft going from the roof you need...

    Jun 16, 2019 at 12:31 PM
  13. Geofd replied to the thread Copper pipe, brass valve, corrosion.

    get your valves at a plumbing supply house or a reputable hardware store

    Jun 16, 2019 at 12:16 PM
  14. Geofd replied to the thread Weird Symmons shower valve problem. I’m a novice folks..

    im glad it worked out

    Jun 14, 2019 at 11:11 PM
  15. Geofd replied to the thread Copper pipe, brass valve, corrosion.

    i ran across the same thing.....IF it is corrosion....the valves that were installed were a home depot/lowes brand...along with hard...

    Jun 14, 2019 at 12:00 AM