frodo's Recent Activity

Help Support Plumbing Forums by donating:

  1. frodo attached a file to the thread No Cold Water to Washing Machine.

    all that is required [ATTACH]

    wbvalve.png Apr 19, 2019 at 8:06 PM
  2. frodo replied to the thread Need to convert copper pipe to flex help please.

    post a picture of what you are talking about

    Apr 19, 2019 at 8:33 AM
  3. frodo replied to the thread No Cold Water to Washing Machine.

    you can blow the air in at the washing machine, i do not understand why you want to blow the stoppage back into your piping system...

    Apr 19, 2019 at 2:28 AM
  4. frodo replied to the thread No Cold Water to Washing Machine.

    Diehard In a residential home, you are required to have a valve at the water meter [the curb stop is acceptable] within 5' of the...

    Apr 19, 2019 at 1:42 AM
  5. frodo attached a file to the thread No Cold Water to Washing Machine.

    you are going to have to blow the pipe out this can be done one of 2 ways turn off all of the valves under the fixtures in the house...

    test_gauge_001.png Apr 18, 2019 at 9:02 PM
  6. frodo replied to the thread No Cold Water to Washing Machine.

    common sense 1] a valve is off 2] the valve is broken 3] pipe has a blockage 4] a break in the line typically, the blockage is...

    Apr 18, 2019 at 1:07 PM
  7. frodo attached a file to the thread How to remove this from hose bib.

    that set screw is as big as a I [ATTACH]There is a youtube that shows a guy doing that but if you look close, he replaced the set...

    6''.png vb__fake_.png Apr 18, 2019 at 2:32 AM
  8. frodo attached a file to the thread Can I put a bathroom in basement?.

    they make a kohler tub with a longer apron, so the drain can hook up above the floor it is not cheap it is a cast iron tub [ATTACH]

    tub_002.png Apr 18, 2019 at 2:23 AM
  9. frodo replied to the thread Kitchen sink, odd basket and strainer.

    this looks like a chinese unit one of my granite suppliers used to use. they are the biggest piece of junk on the planet. if i remember...

    Apr 17, 2019 at 3:23 PM
  10. frodo liked Mikey's post in the thread How to remove this from hose bib.

    I think they do that on purpose -- they don't want you to remove it. Ever.

    Apr 17, 2019 at 2:54 PM
  11. frodo replied to the thread Water Filter.

    A grain of sand is anywhere from 75 to 150 microns, so a 50 micron water filter should be good enough to handle your sediment issue.

    Apr 17, 2019 at 2:54 PM
  12. frodo replied to the thread How to remove this from hose bib.

    once that set screw is set and broke off. it's all over , they need to make those with tamper proof set screws so they can be removed...

    Apr 17, 2019 at 1:14 PM
  13. frodo liked PlumbGate's post in the thread How to remove this from hose bib.

    I was afraid I would have to cut it off. Thanks I will break out the dremel!

    Apr 17, 2019 at 1:11 PM