well my rycom locator was recently stolen so i am looking for other options. with the rycom i had a sonde i used. is there any locator on the market that i could use to just locate the sewer snake and its depth when in the line? thinking this might be easier and lower cost? any ideas?
locator for sewer snake
- Thread starter rltullis
- Start date
Help Support Plumbing Forums:
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
you could get a helper for around 20 k a year, do not have to pay it in one lump some.
weekly payments are ok. sometimes they dont work, you have return them and get a different one.
weekly payments are ok. sometimes they dont work, you have return them and get a different one.
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
since of humor!!! welcome to the forum!!You might be able to use a "brick" to energize your cable. Still would have to buy the locator on top of that.
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
i dont know,
brick of 22lr is about 500 bullets for 30 bucks at wally world
old red brick on the house.
phishfood will be around after awhile, take us to school
brick of 22lr is about 500 bullets for 30 bucks at wally world
old red brick on the house.
phishfood will be around after awhile, take us to school
this is the locator I use seektech-sr20-locator with this "brick"
It will also work with the built in transmitter on our sea snake camera. The "brick" transmitter good for locating copper lines under a slab and gas lines.
It will also work with the built in transmitter on our sea snake camera. The "brick" transmitter good for locating copper lines under a slab and gas lines.
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
my grey matter thanks you!!!!
