Hot Water Heater: Piping Preference

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You don’t say where this will be located.

Some places require flex connections.

Other places forbid them.

Some plumbers prefer the flex copper.

Others think it is junk.

Some like to use the braided hoses.

Others say they fail or give off black deposits.

So lots of variables, in opinion, code, application, location, preference, etc.
 
Any thoughts on the No-Burst Braided Hose water heater connectors?

I do not use them.


https://topclassactions.com/lawsuit...r-faces-class-action-bursting-no-burst-lines/

Fluidmaster Faces Class Action Over Bursting ‘NO-BURST’ Lines
Fluidmaster breached warranties, was negligent, violated consumer protection laws and unlawfully profited from the sale of the defective supply lines.

“These NO-BURST water supply lines burst because Fluidmaster uses an inferior grade of stainless steel that is susceptible to corrosion from everyday household cleaners that are expected to be used and stored in close proximity to the water supply lines,” Smith alleges in his class action lawsuit.

 
I do not use them.


https://topclassactions.com/lawsuit...r-faces-class-action-bursting-no-burst-lines/

Fluidmaster Faces Class Action Over Bursting ‘NO-BURST’ Lines
Fluidmaster breached warranties, was negligent, violated consumer protection laws and unlawfully profited from the sale of the defective supply lines.

“These NO-BURST water supply lines burst because Fluidmaster uses an inferior grade of stainless steel that is susceptible to corrosion from everyday household cleaners that are expected to be used and stored in close proximity to the water supply lines,” Smith alleges in his class action lawsuit.
Thank you for your feedback.
 
I once bumped a flexible water line to a toilet, and it cracked. I've been leery of them since.
Seems that after enough time the plastic gets brittle.
 
I replace all my flexible supply lines every 5 years. I consider it just good insurance.
 
Where practical, I prefer to use "Hard" soldered Type L copper pipe connection? I grew up using nothing but Type L for interior water piping, Type M for low pressure hydronic heating systems and Type K for buried water piping.
 
CPVC is PVC pipes with extra chlorine. Basically, it is a PVC pipe that can be used to carry hot water and is safe for drinking water. Compared with copper pipes, CPVC pipes are smooth and produce little water noise. They are insulated to prevent energy loss, more flexible than metals, and fire resistant.
 
Back
Top