Ron Trejo
Member
- Joined
- May 2, 2024
- Messages
- 6
- Reaction score
- 3
Hi, I have an old Everhot system from 2003 that I'm finally getting around to installing (don't judge me, lol). It's been so long since I removed it, I can't recall what went where and I can't find any instructions that definitively answer my question anywhere. If you look at the top of the tank, there are two places to connect. I assume one is an inlet and the other is the outlet. There are no other connectors anywhere on the tank, and frustraingly...no labels either. I also have the dispenser we had hooked up to it that has hot and cold. It seems all the instructions and videos I can find online have the water supply going UP to the faucet cold, then from the faucet down to the tank, and then from the tank, back up to the faucet on the hot side (so 3 water lines on the dispenser). But if you look at my dispenser, I only have two lines, hot and cold, there is no return line. From looking at the schematic, I feel confident that the connector in the center of the tank is the inlet, and the one on the back right corner is the outlet, but I really don't want to assume. And I am NOT using the chiller, so the supply line will be coming directly from the filter to the tank, and then from the tank up to the hot side on the faucet. Is anyone able to confirm if the connector in the middle is, in fact, the inlet, and the back right corner is the outlet?