Plumbing Technologist

Gift Premium Subscription To jdc

Join Date:


Last Activity:

03-08-2014 12:01 AM

Likes Given: 2

4 Likes on 3 Posts 


  • Posted in thread: Update on my leaky toilet woes on 03-11-2014 at 02:08 AM
    I agree with phish. Doesnt seem to be much there. In addition, looks low to my eye.

  • Posted in thread: frustrated by UK pipe thread on 02-26-2014 at 02:14 AM
    I had this problem with a UK tub and shower faucet that a friend had purchased on ebay. The
    only thing I could do was to solder the connections. Luckily, the threads were brass and the
    adapters were c...

  • Posted in thread: Help identifying a pipe coupling. on 02-10-2014 at 08:17 AM
    That appears to be a Blazemaster CPVC sprinkler head adapter.Looks to me like you're going to
    need to cut out the tee in order to replace the adapter. They do make a sprinkler head tee with
    metal thre...

  • Posted in thread: Seeking a part on 02-04-2014 at 11:12 PM
    I found quite a few online. Google "adjustable shower arm"

  • Posted in thread: Photo attached. Trying to find replacement cartridge for This shower faucet on 01-19-2014 at 02:31 PM
    If you're still looking, I'd give these guys a call. They can usually identify and find hard to
    find parts off of a picture. Ask for Eric or Aaron.

  • Posted in thread: Days Without Water: 5 on 01-14-2014 at 02:03 AM
    The fact that you were getting alot of air and the wet area near the meter makes me think that
    you have a broken line. I know you said the wet area was before the meter, but that doesnt mean
    that the ...

  • Posted in thread: IS there a glue for ABS cracks? on 12-27-2013 at 12:51 AM
    Agreed. That looks like cast iron and not a minor crack. Either way, the only proper fix is to
    cut it out and replace it.

  • Posted in thread: manabloc help please on 12-27-2013 at 12:48 AM
    try turning it just a 1/4 turn (90 degrees) and see if that doesnt shut it off. Sounds like you
    have a stop broken. It still should shut off. It just wont stop at full open or full closed.
    Thats my gu...

  • Posted in thread: two commercial bathroom questions on 12-24-2013 at 01:28 AM
    you'll only need a cold supply going to the water heater. Some of the Eemax heaters (the brand
    I am most familiar with) have an adjustable thermostat while others dont. It all depends on the
    model. Pe...

  • Posted in thread: two commercial bathroom questions on 12-23-2013 at 03:06 AM
    Yes, you will need a thermostatic mixing valve for a sensor faucet. However, unless you have a
    circulating pump or a point of use water heater, it is going to take a bit for the water to get
    warm. Whi...