charless917

LATEST ACTIVITY

• Posted in thread: Grundfos Pump install location right? on 02-09-2012 at 12:34 PM
  You are correct. The ones I saw mounted to the top had the return loop going into the drain
  valve. Which is why I wasn't sure if mine should go there even though my pump and setup is
  different. Since ...

• Posted in thread: Grundfos Pump install location right? on 02-07-2012 at 10:22 PM
  Thanks for the replies. So far i have been told that i should run the return loop from the
  inlet on the first heater, or from the drain valve on the first heater, or leave it alone and
  have it coming ...

• Posted in thread: Grundfos Pump install location right? on 02-04-2012 at 02:52 PM
  Oh no not the Quantum flux capacitor

• Posted in thread: Grundfos Pump install location right? on 02-04-2012 at 12:47 AM
  Would there be an issue using a outlet timer on the pump? It has a timer built in but it only
  allows for everyday to be set to the same. My weekends are very different than my weekdays. I
  thought I co...

• Posted in thread: Grundfos Pump install location right? on 02-03-2012 at 09:20 PM
  Sounds good I'll try that out. Thanks for the help everyone. If you see anything else that I
  should be concerned with please let me know. I'm trying to get everything I need then do it all
  at once.

• Posted in thread: Grundfos Pump install location right? on 02-03-2012 at 04:51 PM
  Once I get the lines insulated I was think about trying gravity and not have the pump on but
  this is a pretty large 2 story house (5,000-6,000 sqft) about 100ft long so Im not sure how
  well it would w...

• Posted in thread: Grundfos Pump install location right? on 02-03-2012 at 01:57 PM
  Yeah the drawing isnt the best. The recirc line comes from the farthest sink and is a proper
  loop, just didnt draw everything past a certain point. Also the hot and cold lines coming off
  of the heater...

• Posted in thread: Grundfos Pump install location right? on 02-03-2012 at 04:25 AM
  Also note that the (hot out) of the first heater is going into the (cold in) on the 2nd heater.
  The picture makes it look like its switched.

• Posted in thread: Grundfos Pump install location right? on 02-03-2012 at 04:23 AM
  Please take a look at my picture and let me know what I need to change. I need to add a few
  shutoffs and I think I need to get a PRV (static pressure is 80psi but think pressure from city
  main jumps u...

• 

  Added a new Photo on 02/02/2012