burchis

Gift Premium Subscription To burchis

Join Date:

08-13-2011

Last Activity:

10-25-2011 9:27 AM

LATEST ACTIVITY

  • Posted in thread: Gas water heater - to drain or not to drain - Advice needed on 09-30-2011 at 11:30 AM
    I am curious to know why draining the tank would cause damage.

  • Posted in thread: Concern/Risk using CPVC at Shower on 09-29-2011 at 03:44 PM
    Thanks for your reply phishfood.I thought about creating a flexible loop between the faucet and
    shower head. Basically build a "U-shape" supply. i.e. From the faucet- run a 4" horizontal and
    then 90 u...

  • Posted in thread: Concern/Risk using CPVC at Shower on 09-28-2011 at 03:01 PM
    I am roughing-in an extra bathroom and plan on using CPVC for service. I have read that there
    is a lot of expansion and compression with this material. My concern is with the supply line
    from the bath...

  • Posted in thread: Double vanity rough-in question. on 08-18-2011 at 02:37 AM
    Bull ****e...... and what I mean by MORE is that you must use a symetrical fitting to use a
    trap arm of one lav as a wet vent and thus must make BOTH trap arms 2" because the Vent must
    terminate at an...

  • Posted in thread: Double vanity rough-in question. on 08-17-2011 at 09:35 PM
    ..... and theres even MORE bs associated with this mess... Not familiar with meaning of 'bs' in
    above reply, please explain.

  • Posted in thread: Double vanity rough-in question. on 08-16-2011 at 10:33 PM
    Or, according to a master plumber that I asked, I could just use one AAV under one of the sinks
    that would serve both sinks.

  • Posted in thread: Double vanity rough-in question. on 08-14-2011 at 06:10 PM
    Thanks to all that have contributed to this post. Let me say that I am not wanting to
    circumvent code or do any work incorrect. I simply post my questions to learn the 'how and why'
    of things. I would...

  • Posted in thread: Double vanity rough-in question. on 08-14-2011 at 03:50 PM
    So can I assume the only reason to have an access to an 'air admittance value' is in case of
    having to replace it?

  • Posted in thread: Double vanity rough-in question. on 08-14-2011 at 01:23 PM
    I read that there are two types of AAV's, one for a fixture and the other for system drain. So
    I am thinking about installing a system type AAV on top of a double sanitary tee to serve both
    vanities. ...

  • Posted in thread: Double vanity rough-in question. on 08-14-2011 at 02:33 AM
    Can an AAV value be used on top of a double sanitary tee which would be closed off with
    drywall.

0 COMMENTS
POST A COMMENT

Newest Threads

Job