Gift Premium Subscription To PipePig101

Join Date:


Last Activity:

03-24-2010 1:33 PM


  • Posted in thread: Jetted Tub on 03-24-2010 at 01:33 PM
    Yes, fiberglass, thanks for the info. Sounds like a good amount of finese would be the key to
    doing it w/o removing the whole kit and kabodle. I'm of the mind that if it works, leave it for
    the next o...

  • Posted in thread: Jetted Tub on 03-23-2010 at 03:05 PM
    I have an existing drop-in jetted tub in good working condition, but my wife wants to change
    the tile around it. It appears that this would require lifting the tub out (or at least up) and
    I'm wonderi...

  • Posted in thread: Bath Sink Remodel Questions on 03-04-2010 at 02:56 PM
    I ran into a problem last night with this project while running the 1/2" copper lines. They are
    coming out of the attic and I'm running the lines around a large recessed mirror and down on
    the left si...

  • Posted in thread: Bath Sink Remodel Questions on 03-03-2010 at 01:35 PM
    Hey thanks for the response PF. I guess that I'm on the right track then. I brought the vent up
    to just about counter height before going horz.That's about what I was thinking on my drain
    stubs.I alre...

  • Posted in thread: Cutting out wall studs on 03-02-2010 at 04:53 PM
    Has anyone got a clean way to cut out wall studs w/o ruining or disturbing the other side of a
    wall? The drywall screws are tough to deal with but nails cut reasonably well.I used a
    Multi-Tool with a ...

  • Posted in thread: Adding a sink on 03-02-2010 at 03:32 PM
    I am just finishing up the same thing and posted a couple of questions on another thread here.
    But I will tell you it is alot of WORK! Don't let the wife talk you into installing a recessed
    mirror. :e...

  • Posted in thread: Bath Sink Remodel Questions on 03-02-2010 at 03:21 PM
    To please the wife, I'm installing a double sink vanity-replacing a single. I'm also installing
    a 60" recessed tri-view mirror/med cabinet. As you can imagine, I have to re-route all of the
    utilities ...


Newest Threads