I have instructions for tightening hot and cold water seats in a Symmons Temptrol Tub/Shower valve. The instructions say to tighten the seats to 15 foot pounds. I've watched some plumbers doing this on youtube videos but have never seen a torque wrench used. Do you pros use a torque wrench? I've never used a torque wrench so I don't have any concept of what 15 foot pounds would be. Is it finger tight, hand tight or cranked down?
Tightening Threaded Plumbing Parts
- Thread starter JIMMIEM
- Start date
Help Support Plumbing Forums:
- Joined
- Sep 28, 2014
- Messages
- 8,578
- Reaction score
- 2,976
you have
loose
finger tight
hand tight
snugged up
snugged 1/4 turn
tight
damn tight
gorilla tight
aw **** it broke
i would put 15' pounds in the area of snugged up 1/4 turn more
maybe one of my Brother plumbers can 'splain it better
loose
finger tight
hand tight
snugged up
snugged 1/4 turn
tight
damn tight
gorilla tight
aw **** it broke
i would put 15' pounds in the area of snugged up 1/4 turn more
maybe one of my Brother plumbers can 'splain it better
Thank You. That gives me a good idea of what ballpark 15 pounds is in.
Latest posts
-
-
-
-
-
-
-
Mysterious "leak" - going to go to battle with the water department....
- Latest: pasadena_commut
