shower help

I'm hoping that someone out there can look at a sketch I drew to let me know if they think it will work.

I want to built my wife a Spa Shower.
I would like it to have 2 main heads (his and hers), A center rain/waterfall,
and body sprays on both sides so she can stand under
the rain head and have side spray.

Thanks in advance for any help
Bill

you need to resize your drawing, it is only 100 px that is like an avatar.
when i tried to blow it up to 800 px it gets blury

Sorry about that, I'll try again with the attachment.
hope it works this time

OK so from the info I have been able to gather from youtube videos, and from searching on here.
Pecs is a no no.
3/4 copper needed for equalization loops for body sprays.
so I think I need
2 - 3/4"thermostatic mixing valves one for each side.
4 - 3/4" flow control valves one for each set of body sprays one for each shower head
1 - 3/4" 2 or 3 way diverted valve to allow the rainfall/waterfall head to be able to run rain or water.

possible use configuration.
2 main showers at once which should be fine as they have their own feeds. (possibly her side body spray)
or rainfall and both sets of body sprays when my wife wants to pamper herself.
Does this sound feasible? would I be better of only having 2 body sprays on each side or do you think 3 will work?
I have attached a new drawing with more labeling.

Thanks in advance for your help and input
Bill