Please tell- How to remove this Shower Cartridge?

Plumbing Forums

Help Support Plumbing Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

buildingengineer

New Member
Joined
Oct 30, 2010
Messages
1
Reaction score
0
Location
Chicago, Illinois
This is an American Standard (All-in-One Temp) Shower Control. Please tell me how to find the product number, and take out the cartridge.

All this tenant is getting is cold water from the shower, the temp control no longer works. Thank you in advance for your help and advice.

American Standard (All-in-One Temp) Shower Control-Faucet.jpg
 
turn off water, (to bldg ) or use the integral stops on the valve itself- with a flat screw driver turn clock wise to close each hot and cold side, turn valve on, and use an adjustable wrench on the valve stem, on the wrench flats, on the heavy brass part of stem-apply torque CCW being careful to back up the applied force if necessary. remove slowly so no little parts (if any) spring out. and notice how the part(s) are orientated for reassembly later with new part(s) if needed. re-assemble in reverse order. In doing a repair it always best to have the new part(s) ready to be installed on hand. unless you need the part to take with you to indentify and find parts. but you sound like you have identified the make already that's good if your correct.
 

Latest posts

Back
Top